DECOPRIMER AQ

Price per bucket – Delivery time is 14 working days from receipt of payment

The delivery time is 14 working days from receipt of payment

PRODUCT DESCRIPTION : DECOPRIMER AQ is a two-component epoxy primer with high adhesion, which can also be used on damp substrates, specially designed as an anchoring primer for cement mortar, also suitable for application on tiles to avoid their demolition.

MAIN:
 Easy to use
 Excellent adhesion to all common building materials constructions such as concrete, tuff, natural stone, bricks, cement blocks,
Floor tiles
 Grouting of brick, stone or tile joints
 Excellent adhesion even on wet surfaces
 Suitable for both outdoor and indoor use
 Can be painted over with any epoxy or polyurethane processing cycle
 Enables rapid implementation of the BICOMPONENT ULTRADECOR system o
ONE-COMPONENT ULRADECOR

PREPARATION OF THE SOIL
The preparation of the substrate is essential, so the surface must be free of oils, greases, dirt, mold, paints and anything that could affect the adhesion of the product, water build-up must be removed or dried beforehand. To further improve adhesion to the substrate, it is recommended to carry out surface preparation of the flooring by sandblasting, sanding or sanding before applying DECOPRIMER AQ.

APPLICATION
Mix component A thoroughly, then pour component B into component A and mix with a slow-running drill.
After mixing, DECOPRIMER AQ can be applied with a roller, if a vapor barrier is required, add Portalnd cement (3.25 or 4.25) in a 1:1 ratio with the primer and apply with a trowel. If you want to significantly increase the mechanical strength, it is possible to add quartz with a grain size of 0.1-0.5 mm in a ratio of primer: cement to quartz 1:1 in addition to the cement. Then add 10% water to the total weight.

SPECIFICATIONS
Specific weight – 1.10 kg / L
Viscosity – 10000 mPa·s
Catalytic Ratio – A:70 B:30
Opacity (primer: cement: quartz) – 2 kg / m2

Adhesion to concrete – > 3.5 N/mm2

QUALITY‘

It is certified that this product is manufactured according to international standards, constantly undergoes laboratory tests, is checked before each shipment, so that the product is of good quality.
NOTES TO THE END USER
The data contained in this document are derived from tests and observations carried out in the laboratory using reliable methods and can in no case be considered exhaustive. This information is current at the time of issuance of this technical data sheet.
It is the user’s responsibility to check that the data provided in this data sheet corresponds to the date of the use of the product, comply with all applicable hygiene and safety regulations, as well as verify the specific characteristics and methods of use of the product on a case-by-case basis that is beyond the direct control of the manufacturer.
The manufacturer does not provide a warranty and assumes no responsibility for any damage that may result from improper use of the product or for damage that may have occurred after the time of product distribution.